Follow by Email

Thursday, December 2, 2010

Making crooked boxes







These are the boxes that form the frames around the port lights. As the title implies they are not really square, but more of a parallelogram in shape. Each set of port frames has a slightly different angle that was determined by following the line of the shear rail. We also tried to line up the top and bottom of the boxes so that when we install the interior tongue and groove planking between the frames, all the lines should flow nicely fore and aft. In the last couple of shots you can see the nailers installed that will support the interior planking. Next big project is insulation...

No comments:

Post a Comment